Using Method
a. Install the steam hose in the steam output plug, and then screw tightly.
b. Refer to Section 3 "Accessories and Usage" and install the appropriate accessory for each job.
c. Open the cap of water input, add water and enclose the cap.
d. Switch the power button to on, then the Power Indicator light is on red, which means Steam Cleaner is preheating. After 20~30 seconds, the Ready Indicator Green light will lit, which means Steam Cleaner is ready for use.
e. Hold the steam hose handle, press the button to on, wait about 40 seconds, a steady flow of steam will flow out of nozzle, then you can clean and disinfect.
f. When the water is below the water level line, a yellow Low Water Indicator light will turn on, which means additional water is needed.
g. When the Steam Cleaner is ready for use, and the steam hose power button is switched on, and there's no steam or only water is emitting, this is a normal feature. Simply adjust the steam volume to control the amount of steam as needed.
Specification
Name: Steam Cleaner
Power: 1800W
Current: AC220V~50Hz
Kit Net Weight: 3.5kgs
Kit Weight: 4.0kgs
